6mm Road Set
Created by Melly.Monkey and came 2nd in our our Flat Terrain Competition.
These roads were made for 6mm terrain. Each road is approximately 1 inch long and .25 inch wide. A master road was sculpted using Sculpey oven bake clay. Once the master was complete, a frame of Legos was set around it to create a box to pour a silicone mold mix into. This was done 3 times in total to help reduce the casting time later. The 15 casts were made using Merlin's Magic plaster with a dab of dish soap added to help break the surface tension of the water. Once dry, the casts were painted using acrylic paints & washes.
Keywords: 6mm
casting roads stonework
View other entries in the Flat Terrain Competition.
View other competition entries by Melly.Monkey.
Copyright & Credits
TerraGenesis was created in 1997 by Gary James and is currently owned, edited and maintained by Andy Slater, however the ideas and opinions expressed are those of the individual contributors. TerraGenesis and its content are © Andy Slater, unless otherwise stated, and should not be reproduced without permission.
The information published is correct to the best of our knowledge however we can accept no liability for errors. (Please let us know if you spot something.) Neither can we accept liability, but you can credit us if you like, for the results of any actions based upon the information. Modelers should use their own research, judgment and common sense when assessing the potential benefits and/or hazards of using any of the materials or technique described on these pages.
Some areas of the site use a modified version of phpBB so we owe a word of thanks to the team over at phpBB Group and wish them well with its future development.
Trademarks of companies mentioned in these pages, have been used without permission. No challenge is intended to the status of these trademarks.